Results 1 to 8 of 8

Thread: Almost complete 1990 5.0 engine - Core or clean up and use as is

  1. #1
    Club Member 2MANYMUSTANGS's Avatar
    Join Date
    Jul 2012
    Location
    Oxford
    Posts
    269

    Default Almost complete 1990 5.0 engine - Core or clean up and use as is

    I have a 5.0 engine that I am pulling out of one of my foxes. It is basically stock. The engine runs well and you can hear it before you buy it. It has 100,000 miles on it. The only issue it has is some oxidation or a build of of some kind in the water passages. I was going to flush it and run it as-is but decided to build a new engine instead. For the most part it will be a complete engine. I only need the distributer, a couple sensors, and maybe the fuel lines. Otherwise it will be complete pan to throttle body. I will post some pics tonight.

    300 OBO. Send me a PM if you are interested.

  2. #2
    Club Member 2MANYMUSTANGS's Avatar
    Join Date
    Jul 2012
    Location
    Oxford
    Posts
    269

    Default

    Nobody needs a core for a new engine build?

    BUMP

  3. #3
    Club Member 2MANYMUSTANGS's Avatar
    Join Date
    Jul 2012
    Location
    Oxford
    Posts
    269

    Default

    BUMP

  4. #4
    Forum Member Rodzilla's Avatar
    Join Date
    Apr 2011
    Posts
    76

    Default

    Location

  5. #5
    Club Member 2MANYMUSTANGS's Avatar
    Join Date
    Jul 2012
    Location
    Oxford
    Posts
    269

    Default

    I am in Oxford - About 10 miles north of the Palace of Auburn Hills. The engine is still in the car and you can hear it run. Can also do a compression test as well. My plan is to pull it this weekend or sooner if I sell it. PM me if you are interested.

    Quote Originally Posted by Rodzilla View Post
    Location

  6. #6
    Club Member Jdubb's Avatar
    Join Date
    Sep 2013
    Location
    The Mi
    Posts
    211

    Default

    Are all the a acc and brackets on it
    To stay current on project my 89 fox named...PWRTOUR... www.facebook.com/DUBBMotorsports

  7. #7
    Club Member 2MANYMUSTANGS's Avatar
    Join Date
    Jul 2012
    Location
    Oxford
    Posts
    269

    Default

    I am replacing the engine with a high performance small block that I built. I am using all of the accessory brackets, the distributer, and a few sensors. Everything else is there. I had the engine running yesterday and will upload a video later today. I will probably be pulling this engine tomorrow.

    Quote Originally Posted by Jdubb View Post
    Are all the a acc and brackets on it

  8. #8
    Club Member 2MANYMUSTANGS's Avatar
    Join Date
    Jul 2012
    Location
    Oxford
    Posts
    269

    Default

    Engine is just about out. Make me an offer. The engine ran well.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •