Ok done, I wouldn't try this at home. You need a press with all the spacers and correct tools like a bearing separator to go with it.
There's a pretty big spring in the center section of the snout for some reason?.?. The snout shaft needs to be pressed out first-from the front-then it will come out/fall out of the rear.This is when you find the big spring. Once you get the shaft pressed out of the snout its all pretty self explanatory.
All said and done it took about 45min.
Last edited by svtserpent; 04-22-2014 at 07:15 AM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks