Subbing because it looks as though I'm going to be dropping the same year LT1 into my old Buick, assuming it's not thrashed anyway.
Subbing because it looks as though I'm going to be dropping the same year LT1 into my old Buick, assuming it's not thrashed anyway.
TooSlo86 Racing
NMRA Factory Stock #10 for 2014
#5215 in 2013 TooSlo86 on Facebook
Thanks to; Scott Brown, Competition Components
I took the easy way out and put a piece of cardboard between the rad. and condenser for now. It has heat and runs around 185 at the most. It's been too cold to mess with it with no heat in the garage and my arthritis acting up.
I'll post some pics once it warms up enough to get it cleaned up.
I took it on a little ride to Almont the other day and it did surprisingly well on fuel, using a little over 1/8 tank there and back.. taking M53 there and a few back roads on the way back
Mike
Here's a pic from the 2nd owner that I just happened upon via a friend. Found out the van has head work (alum), cam, and a tune as well as a built 4L60E and the rear end was just redone last summer.
Mike
I've been throwing around the idea of some old school Cragar SS's like a 15x7 up front with a 15x8 or 10 in the back.. just hard to find a cheap set that's 5x5 bolt pattern.
Mike
Thats sweet...i have been looking for two used 15x12 rim with a 5x5 bc and no luck...i'm going to have to buy new.......I do have 4 Chevy rally rims with a 5x5 bc and there a 15x8 but they need blasted and painted that i might sell soon..
Mike
99 Ultra Classic, 89 Softail, 67 Kaw 250
TooSlo86 Racing
NMRA Factory Stock #10 for 2014
#5215 in 2013 TooSlo86 on Facebook
Thanks to; Scott Brown, Competition Components
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks