Results 1 to 4 of 4

Thread: 2007 ford fusion front wheel bearing replacement

  1. #1
    Club Member Billydroveit's Avatar
    Join Date
    Sep 2008
    Location
    Taylor
    Posts
    5,711

    Default 2007 ford fusion front wheel bearing replacement

    ok how hard is it to replace the front wheel bearing on a 07 fusion. I see by google searching they are prone to failure, and have a friend with one toasted. Will i need a press, or is it a hub assembly? While working at Ford in Dearborn i think this is the only hub bearing i never had to replace...lol

    Thanks for any help fellas...
    90 Red Fox Notch factory short block on 175Sold
    02 GMC Sierra 2500 ECLB Passsing everything but a gas station
    98 Cavalier 2.2 rusty but trusty
    www.SKUNKRACING.net

    Quote Originally Posted by 99slverZ View Post
    I will do actual slave labor for $25/hr. Literally I will wear a loin cloth and you can whip me for that kind of money.

  2. #2
    Club Member braxx's Avatar
    Join Date
    Apr 2004
    Location
    Dearborn Heights, Mi
    Posts
    1,569

    Default

    Quote Originally Posted by Billydroveit View Post
    ok how hard is it to replace the front wheel bearing on a 07 fusion. I see by google searching they are prone to failure, and have a friend with one toasted. Will i need a press, or is it a hub assembly? While working at Ford in Dearborn i think this is the only hub bearing i never had to replace...lol

    Thanks for any help fellas...
    Do you still need this info? If so, PM me with your email address and I will send you the 12 page procedure (I'm not joking, 12 pages.) I bet you could use a "hub tamer" and save A LOT OF WORK.
    Josh
    1995 Ford Windstar
    2002 Chevy 2500HD 4x4 8.1L Allison

  3. #3
    Junior Member
    Join Date
    Feb 2014
    Posts
    1

    Default

    Quote Originally Posted by braxx View Post
    Do you still need this info? If so, PM me with your email address and I will send you the 12 page procedure (I'm not joking, 12 pages.) I bet you could use a "hub tamer" and save A LOT OF WORK.
    Josh,
    Do you still have access to the 12 page procedure for changing the front wheel bearing on an 07 Fusion?
    I am fixin to do both driver and passanger on my 07 V6 SE Fusion. This is my first reply or post on the motown forum. Thanks for your time.

  4. #4
    Club Member braxx's Avatar
    Join Date
    Apr 2004
    Location
    Dearborn Heights, Mi
    Posts
    1,569

    Default

    I'm sorry that I just saw this.
    Do you still need the info?
    If so, send me a private message with your email address.
    FYI, there are awesome special tools out that let you replace the bearing while the knuckle stays on the vehicle. They save a lot of time. The 12 page procedure I can give you is the LONG way of doing it but you would still need a press to remove the hub and bearing after you remove the knuckle.
    I personally use the OTC hub grappler and I don't have to remove the knuckle from the vehicle.
    Quote Originally Posted by Porky View Post
    Josh,
    Do you still have access to the 12 page procedure for changing the front wheel bearing on an 07 Fusion?
    I am fixin to do both driver and passanger on my 07 V6 SE Fusion. This is my first reply or post on the motown forum. Thanks for your time.
    Josh
    1995 Ford Windstar
    2002 Chevy 2500HD 4x4 8.1L Allison

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •